The SDF Rotary 2" is a semi-automatic regenerable filter. No need for cartridge replacement.

 

Physical Dimensions	Connections
Container diameter: 15 cm. (6")	Main inlet-outlet 2", threaded with 2" BSP
Container length : 45 cm. (18")	Backflushing drain valve: ½" threaded exit.
Total length incl. PVC tube: 65 cm (25")
Total weight: 4.1 kg. (9 lbs.)

 

 

Pressure	Flow Rate
From small increment over the headloss pressure up to 8 bars (115 psi).	All the 2" filters, of any mesh, will operate at flow rates up to 25 m3/hr (100 GPM)

 

Operating range :

Mesh: Selection from 12 color coded disk types, Coarse 500 to fine 5 microns.

Cleaning: Effective regeneration mechanism of a simple twist to the filter's body that back flushes clogged contaminants. The back-flush uses clean filtered water. For best cleaning it is recommended to avoid outlet flow during back flushing. A regulating valve may be installed at the outlet for this purpose.

 

Installation and operation hints are the same for the 1" and 2" types.

 

Typical Characteristics: