Surface Irrigation

A tiny water spreader for low volume irrigation. It is designed with a vibrating center pin to generate a circular uniform droplet distribution over a range of diameters from 2 to 6 meters.

Available for variety of flow rates, from 20 L/hr (5.3 GPH) to 160 L/hr (42.3 GPH). The nominal flow rates at pressure of 2 bars (30PSI) and variations of the flow under pressure are provided in the Flow Rate Chart. A special high-rate / heavy duty Vibro-Spreader of 240 L/hr is available on threaded 1/2″ head.

The wetting diameter for each flow rate is provided in a Diagram of wetting diameters.

The vibrations of the center pin, together with the impingement of the water jet on the upper cap, generates an axi-symmetric droplet distribution and prevents accumulation of dirt or lime deposits in the nozzle.

Our standard model (left picture) operates at pressure of over 1.8 bars, and the low pressure (LP) model (right picture) that operates at pressures from 1.1 bar.

For more details and specification pdf view or download the product brochure.

When in upright position, the Vibro Spreader is automatically sealed against insects after water shut down.

The upside down (UD) version is extremely useful for overhead irrigation in greenhouses. In this mode the device is hanging down from an upper supply line and its droplets pattern is ejected at elevation of ‏7° creating a watering area identical to the regular Vibro-Spreaders of the same flow rate.

A tiny water spreader for low volume irrigation. It is designed with a vibrating center pin to generate a circular uniform droplet distribution over a range of diameters from 2 to 6 meters.

Available for variety of flow rates, from 20 L/hr (5.3 GPH) to 160 L/hr (42.3 GPH). The nominal flow rates at pressure of 2 bars (30PSI) and variations of the flow under pressure are provided in the Flow Rate Chart. A special high-rate / heavy duty Vibro-Spreader of 240 L/hr is available on threaded 1/2″ head.

The wetting diameter for each flow rate is provided in a Diagram of wetting diameters.

The vibrations of the center pin, together with the impingement of the water jet on the upper cap, generates an axi-symmetric droplet distribution and prevents accumulation of dirt or lime deposits in the nozzle.

Our standard model (left picture) operates at pressure of over 1.8 bars, and the low pressure (LP) model (right picture) that operates at pressures from 1.1 bar.

 

For more details and specification pdf view or download the product brochure.

When in upright position, the Vibro Spreader is automatically sealed against insects after water shut down.

The upside down (UD) version is extremely useful for overhead irrigation in greenhouses. In this mode the device is hanging down from an upper supply line and its droplets pattern is ejected at elevation of ‏7° creating a watering area identical to the regular Vibro-Spreaders of the same flow rate.